SIGMA COMPLETE KIT
Offering very good protection. All you need to
be protected and dry. Ventilation is an option.
The Sigma Kit includes: Waistcoat and Overall with integrated Hand Protection.
Size S, M, L, XL, 2XL, 3XL.
DELTA COMPLETE KIT
Offering very good protection and excellent
comfort. Ventilation is an option. The Delta Kit
includes: Waistcoat, Trousers and
Hand Protections.
Size S/M, L/XL, 2XL/3XL.
GAMMA COMPLETE KIT
Provides comprehensive protection and high comfort. Ventilation is an option. The Gamma Kit includes: Trousers and Jacket with integrated Hand Protection.
Size S/M, L/XL, 2XL/3XL.
The Gaiters are to be worn outside of the user´s regular protective boots. The entire area round the leg and the foot is protected. Three clips and velcro in the rear, and an easily adjustable strap under the sole, ensure that the Gaiters stay in place. Very comfortable and light to wear. Also available in a Flame Retardent AND High Visibility version, in protection level 20/30. Certified according to EN 20471:2013
Sold in pairs. Weight 1.0 kg/2.2 lbs.
BOOTS 3000
Weight 1.9 kg / 4.2 lbs. each (Boot 3000 size 9).
Size Eur 42-48 / US 9, 9.5, 10, 10.5, 11, 12, 13
The balaclava, which is made of neoprene, is designed to keep the body dry. The breast lap is made of Cordura fitted with adjustable straps to hold it in place. The Balaclava offers no protection against waterjetting. Can ideally be used together with the Overall.
One size.
Hoses break and couplings break, often very close to the operator and at sensitive areas of the body, such as the abdomen, the arm pit or the neck. These areas are difficult to protect properly. To further improve the safety of the operator, it is recommended to use a Hose Protection/Shroud.This provides effective protection for the operator as it has been tested for 3000 bar / 43500 psi. Available in 3 lengths: 750, 1400, 1800 mm / 2.5, 4.6, 5.9 ft., and 3 diameters: 36, 47 (swivel) and 59 mm/ 1.42, 1.85 (swivel) and 2.32 in. Weight 2.3 kg / 5.1 lbs. (Hose Protection diameter 59 mm, length 1400 mm /
2.32 in., length 4.6 ft.).
HOSE CONNECTION COVER
Inner diameter 61 mm / 2.4 in.
The full area of the Apron has built-in protection. The position of the Apron can be changed through the adjustable shoulderband. The special construction of this band helps spreading the weight of the Apron which is an important comfort detail. The Apron can be upfolded and fastened, for easier work in stairs and on ladders. Very easy to put on and off. Recommended for work on flat surfaces and is often used in combination with Hand Protections
and Gaiters or Boots 3000. The Apron comes in one size.
HEAD PROTECTION 20/30
The Visor meets the requirements for Eye protection. It is replaceable and can be set in folded up position. Hearing Protectors are classified. They can be adjusted vertically and set in different positions against the head, for optimal protection and fit.
• Temperature range -30° to +150°
• Recommended life span 3-5 years
CE-marking, approved according to:
• Industrial safety helmets: SS-EN397:2012
• Eye protection: SS-EN166:2001
• Hearing Protection: SS-EN 352-3:2002
WHIP STOP
An excellent way to secure hose ends at foot pedals, pumps or connections. Properly mounted, it will catch a broken hose and prevent it from whipping. The whip stop is mounted by slipping it over the hose ends, stretching it and finally tightening the ends and secure with the rubber lock rings.
Tensile strength 1800 kg / 4000 lbs.
Length approx. 75 cm / 2,5 ft.
TST SPECIAL GREASE REMOVER
Mix the TST Grease Remover 1:10 with warm water 40°C/105°F. Apply to the dirty garment surfaces with a brush. Leave for about 20 minutes. If the garments are extremely dirty, use the brush together with lukewarm water on the dirty areas. Rinse with lukewarm water. Let the garment dry in a drying room and reach a temperature of max 60°C/140°F (to reactivate the water and grease protection).
